Why We Do We Love Double Glazing Door Lock Repairs (And You Should, Too!)

Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism broken? Maybe the window or door handles don't meet up properly or are hard to use.

It is essential that your double glazed doors function smoothly, or else you'll lose energy and increase the chance of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.

Snapped Key

If a key breaks within the lock, it can be incredibly annoying. It's also potentially a security risk since the door might not lock and make you vulnerable to burglars. There are a couple of quick fixes you can try to resolve the issue and make your door functional again.

The first step is to remain calm. If you panic, you could end up pushing the damaged key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to help break pieces that might be hindering the flow. If you happen to have a small piece of the key visible, you can make use of a paperclip or other metal object with a thin surface to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as hook extractors, and some Jigsaw blades also work for this use. If you do not have any of these handy, you can use needle-nose pliers to bend them and create hooks. You can also use a pair tweezers to grasp and pull out the remaining pieces of broken keys.

If you are unable remove the broken piece of key, use a lock deicer. It is found in most hardware stores, and it works by freezing any moisture or ice that might be in the lock.

If none of these solutions seem to work, it could be time to call a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure the double glazing door mechanisms to ensure that they are simpler to use. You can book a double-glazing repair online or contact us to discuss your needs.

Broken Cylinder

A broken cylinder is an immediate security risk. A professional locksmith can easily fix the cylinder. To fix the cylinder, locksmiths will need to tap it. This can be accomplished with a hammer or other tool. However, the best method is to make use of a wire or a long match. The match or wire's end close to the keyway. After that, the locksmith will strike the lock and break it open. This is far better than using a hammer that could damage the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and head are made of different metals, including cast iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand faster than the rest.

Another possible cause for cracks in cylinders is corrosion. If the cylinder head and cylinder block are not properly maintained, this can cause corrosion or rust, which may cause them to expand at greater rates than they ought to. This can lead to cracks as time passes.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, it could be due to many things. A malfunctioning locking mechanism, misalignment, or an old handle are the most common reasons for this issue.

This is a simple and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith can usually fix this problem within one hour of arriving at your home. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, and also change the gearboxes. A locksmith with experience can always advise you on the most cost-effective options for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra security layer from burglars. It's a small amount to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a double glazed window repairs near me surprise that window handle locks could break. They have complex mechanisms that become less effective over time. If yours is damaged it may be difficult to identify the cause of the issue. Make sure you fix it correctly.

Fixing the broken handle, regardless double glazed repairs near me of whether it's the internal latch or locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing your handle can be costly and may damage the door's frame and lock It is therefore worth taking some time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. This should be located on the inside of the back plate, and is normally concealed by an aesthetically pleasing cover for the screw reasons. Be careful not to lose any of the internal components inside the handle, for example the plates or levers that are on either side of the spindle. It is best to keep them in click here the same place so you can replace them in the event of a need.

Next, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is loose, you can remove the handle and remove the broken spindle. Replace it with a brand new one, ensuring it's the same length as the old one (you can typically find these on the internet or in hardware stores) and screw it securely in the correct position. Be careful not to overtighten because this could damage the handle or the window frame.

Ensure the new handle is correctly fitted, then close and test the handle. The hope is that it will function smoothly and you'll be able open your window again.

Be sure to double-check that your uPVC window is closing properly when you're using the handle. If they're not closing properly, you could experience damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on the frames of your windows to ensure they close correctly.

Broken Spindle

It is quite common that the spindle inside the handle is broken, not the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that operates a locking device in the frame of the window. The handle is connected to a central rod that triggers the cams with a mushroom shape that lock into check here the window frame keep. If the dead latch mechanism fails to open when the handle is turned, it is possible that the spindle is broken and this could be an extremely frustrating issue.

Fortunately, there are ways to remedy this situation. A reputable locksmith can swiftly and effectively fix the issue. A good locksmith will be able to disassemble the window's handle using a tool to take out the wheel from the area that houses the spindle. This is done without damaging the handle or causing any other damage to the frame of the window.

After removing the wheel, the technician can examine the spindle to determine the cause of the break. This involves disassembling the spindle, and then examining every component, observing any damage or excessive wear. The process is done in a clean room by skilled technicians.

Then, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from working normally. Following this the spindle could be repaired or replaced. If it's being replaced, the technician will need a dowel of a similar size to the original and drill mating holes into both parts of the spindle. This will ensure that the new spindle has an exact fit with the handle.

If the spindle is damaged and cannot be repaired, it could require replacement completely. Home centers sell generic replacements but if the style of your window is unique then it is double glazing company near me necessary to speak with a woodworker or cabinet maker who can duplicate the exact model for you. Once the spindle has been installed, it is fixed to the handle. Place the screw holes on the handle to the existing screws in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.